Model PZD700 M/S Piezo Driver/Amplifier

Now equipped with a SHV type high-voltage output connector.

The Trek Model PZD700 M/S amplifier system provides precise voltage control and delivers twice the current of our standard Model PZD700. The PZD700 M/S is a high-voltage DC power amplifier with an available bipolar voltage range of 0 to ±700 V and unipolar ranges of 0 to +1.4 kV or 0 to -1.4 kV DC peak AC. Output current capabilities of ±200 mA for the bipolar range and ±100 mA for the unipolar ranges are available. Voltage ranges and input configurations (inverting or noninverting) are customer specified and factory set.

Applications for the PZD700 M/S include piezoelectric driving/control, laser modulation, semiconductor research, and ion beam control. Features include an all-solid-state design, a slew rate greater than 200 V/µs for the ±700 volt range, a slew rate greater than 150 V/µs for either the 1.4 kV ranges, and a small signal bandwidth of greater than 100 kHz for all voltage ranges. The four-quadrant active output stage sinks or sources current into reactive or resistive loads throughout the output voltage range. This capability is essential for achieving the accurate output responses and high slew rates demanded by reactive loads.

Precision voltage and current monitors provide buffered low-voltage representations of the high-voltage output and load current for monitoring purposes or for use as feedback signals in a closed-loop system. The Digital Enable feature provides a connection for a remote device to turn ON and OFF the high voltage of the instrument. The Model PZD700 M/S has a Dynamics Adjustment feature which is used to optimize the AC response of the output for various load configurations.

back to top

PERFORMANCE

• DC Voltage Gain
  0 to 300 V/V, adjustable using front panel potentiometer.
• DC Voltage Gain Accuracy
  input to output)
  Better than 0.1% for gain set for 200 V/V.
• Offset Voltage
  Less than ±500 mV.
• Output Noise (all ranges)
  Less than 50 mV rms to 20 kHz for a 1 nF load.
  Less than 100 mV rms to 20 kHz with no load.
  Measured with the true rms feature of the Hewlett Packard Model 34401A digital multimeter.
• Small Signal Bandwidth (-3 dB)
  DC to greater than 100 kHz.
• Settling Time to 1%
  Less than 50 µs when critically damped.
• Stability (with factory gain set for 200 V/V)
  
  • Drift with Temperature
    Less than 100 ppm/°C.
  • Drift with Time
    Less than 50 ppm/hr, noncumulative.
• Automatic Power Limit
  Automatically limits the internal power dissipation to protect the Model PZD700 M/S from overheating. The following graph illustrates the automatic power limit.
• 

back to top

PRODUCT FEATURES

• Digital Enable
  A BNC connection for a TTL compatible signal to turn on and off the high-voltage output is provided for each channel. A TTL high (or open) turns off the high-voltage output. A TTL low turns on the high-voltage output.
• Gain Control
  The DC gain of the Model PZD700 M/S is adjustable from 0 to 300 V/V.
• Dynamics Adjustment
  One graduated potentiometer is used to optimize the AC damping and response of the output signal under various load configurations.
• High-Voltage LED
  Front panel green LED illuminates when the high-voltage is on.
• Input Configuration
  The PZD700 M/S is factory configured as a noninverting amplifier. An inverting amplifier configuration is available. Specify when ordering or contact TREK, INC. for more information.
• Voltage Monitor
  A buffered output providing a low-voltage replica of the high-voltage output.
  • Scale
    1/200th of the high-voltage output.
  • DC Accuracy
    Better than 0.1% of full scale.
  • AC Accuracy
    Calibrated using Ross Model VD 30-4.1-BD-KC-ALU high-voltage divider.
  • Offset Voltage
    Less than 5 mV.
  • Output Noise
    Less than 10 mV rms (measured using the true rms feature of the Hewlett Packard Model 34401A digital multimeter).
  • Output Impedance
    Less than 47 ohms.
• Current Monitor
  A buffered output providing a low-voltage representation of the load current.
  • Scale
    0.05 V/mA.
  • DC Accuracy
    Better than 1% of full scale.
  • Offset Voltage
    Less than 25 mV.
  • Output Noise
    Less than 20 mV rms (measured using the true rms feature of the Hewlett Packard Model 34401A digital multimeter).
  • Output Impedance
    Less than 0.1 ohm.
• Power On LED
  Front panel green LED illuminates when the power is on.
• Limit Indicator
  A yellow indicator will illuminate when the Model PZD700 M/S fails to produce the required high-voltage output such as from the Automatic Power Limit or output shorting.

back to top

OUTPUT

• Bipolar Model
  0 to ±700 V DC or peak AC
  • Current
    0 to ±200 mA.
  • Slew Rate (10% to 90%, typical)
    Greater than 200 V/µs.
  • Large Signal Bandwidth (1% distortion)
    DC to greater than 20 kHz.
• Unipolar Model (Positive)
  0 to +1.4 kV DC or peak AC
  • Current
    0 to ±100 mA.
  • Slew Rate (10% to 90%, typical)
    Greater than 150 V/µs.
  • Large Signal Bandwidth (1% distortion)
    DC to greater than 12 kHz.
• Unipolar Model (Negative)
  0 to -1.4 kV DC or peak AC voltage range
  • Current
    0 to ±100 mA.
  • Slew Rate (10% to 90%, typical)
    Greater than 150 V/µs.
  • Large Signal Bandwidth (1% distortion)
    DC to greater than 12 kHz.

back to top

AMPLIFIER INPUT

• Input Voltage Range
  0 to ±10 V DC or peak AC. (See Gain Control.)

  Input Impedance (noninverting)
  90 kohm, nominal

  Input Impedance (inverting)
  1 Mohm, nominal

back to top

ACCESSORIES

• Accessories Supplied
  • Operator's manual, SHV mating connector, and line cord.
    

back to top

GENERAL

• Dimensions
  110 mm H x 434 mm W x 445 mm D
  (4.3" H x 17" W x 17.5" D).
• Weight
  10 kg (22 lb).
• High-Voltage Output Connector
  SHV connector.
• High-Voltage Output Impedance
  3 ohms.
• Amplifier Input
  BNC coaxial connector.
• Digital Enable Connector
  BNC coaxial connector.
• Power Requirements
  • Line Supply
    Factory set for one of two ranges: 90 to 127 V AC or 180 to 250 V AC, at 48 to 63 Hz.
  • Power Consumption
    175 VA.
• AC Line Receptacle
  Standard three-prong AC line connector with an integral fuse holder.
• Operating Conditions
  • Temperature
    0 °C to 40 °C.
  • Relative Humidity
    To 85%, noncondensing.

back to top

CERTIFICATION

TREK, INC. certifies that each Model PZD700 M/S is tested and calibrated to specifications using measurement equipment traceable to the National Institute of Standards and Technology or traceable to consensus standards.

All specifications are with no load unless otherwise noted. Factory standard settings are for ±700 volt range, a gain set for 200 V/V, with a noninverting input.

All specifications are with no load unless otherwise noted and are subject to change.

back to top