TREK Product - 2210 40W High Voltage Amplifier

TREK Model 2210 High voltage amplifier

Trek Model 2210 is one of several models in Trek’s 2200 Series of high-voltage 40 watt amplifiers providing high performance and attractive pricing. Model 2210 offers precise control of output voltages in the range of 0 to ±1 kV DC or peak AC, output currents in the range of 0 to ±40 mA peak AC, and large signal bandwidth DC to 40 kHz (-3dB).

As with other Trek amplifiers, Model 2210 includes high performance features such as DC stability, wide bandwidth, well-regulated & controlled AC output signals, full four-quadrant class AB all-solid-state output stages, DC offset adjustment with front panel metering, and auto-recovery shutdown for protection from overpowering the output.

The output stage sinks or sources current into reactive or resistive loads throughout the range of output voltages. This is important to achieve accurate output response and high slew rates demanded by reactive loads.

Model 2210 offers additional value. The unit comes with a 2-year warranty, is CE marked, RoHS compliant and HALT tested.

Applications for Model 2210 include piezo-electric, electrooptic, MEMS and many others.

Show/Hide Product Technical Information

AMPLIFIER INPUT & Output

Output Voltage Range
0 to ±1000 V

Output Current
0 to ±20 mA DC
0 to ±40 mA peak AC (for 5 ms minimum)

Amplifier Input Votage Range
0 to ±10 V DC or peak AC

Input Impedance
10 kΩ , nominal

PERFORMANCE

DC Voltage Gain
100 V/V (Better than 0.5% of full scale)

Offset Voltage
Less than 1 V.

Output Noise
Less than 30 mV rms

Slew Rate (10% to 90%, typical)
Greater than 150 V/µs

Large Signal Bandwidth (-3dB)*
DC to greater than 40 kHz

Small Signal Bandwidth (-3dB)
DC to greater than 100 kHz

Settling Time to 1%
Less than 30 µs for a 0 to 1000 V step

Internal Capacitance (HV output)
300 pF

Automatic Power Limit
Automatically limits the internal power dissipation
to protect the Model 2210 from overheating

Stability

Drift with Time
Less than 300 ppm/hr - noncumulative
Drift with Temperature
Less than 180 ppm/°C

*Large Signal Bandwidth, Square Wave Response and Output Noise are optimized using the "Dynamic Adjustment" on the front panel of the amplifier.

PRODUCT FEATURES

Digital Enable
A BNC connection for TTL compatible signal to turn on and off
the high-voltage output is provided for each channel. A TTL high
(or open) turns off the high-voltage output. A TTL low turns on the
high-voltage output.
Response
A graduated potentiometer is used to optimize the AC response
of the output signal under various load parameters.
High-Voltage LED
Front panel red LED illuminates when the high-voltage is on.
Voltage Monitor
A buffered output provides a low-voltage replica of the high-voltage output.
Scale Factor
1/100th of high-voltage output
Current Monitor
A buffered output provides a low-voltage representation of the load current.
Scale Factor
0.2 V/mA

DC Offset Adjustment

Range

Accuracy
Better than 1% of reading
Offset
2 counts maximum

GENERAL

Dimensions
85 mm H x 205 mm W x 325 mm D
(3.3" H x 8.1" W x 12.8" D)
Weight
2 kg (4.4 lb)
High-Voltage Output Connector
SHV Connector
Amplifier Input
BNC connector
Current Monitor
BNC connector
Digital Enable Connector
BNC connector

Power Supply
Operating Conditions
- Temperature
  0 °C to 40 °C
- Relative Humidity
  To 85%, noncondensing

ACCESSORIES SUPPLIED

Operator's manual, SHV high-voltage cable assembly and external 24 VDC (±0.5 V) regulated.

CERTIFICATION

TREK, INC. certifies that each Model 2210 is tested and calibrated to specifications using measurement equipment traceable to the National Institute of Standards and Technology or traceable to consensus standards.

All specifications are with no load unless otherwise noted and are subject to change.

High Voltage Power Amplifiers