get email updates
government
Press Releases
Product News
New HV Amplifier First to Provide +/-50kV
Trek’s Model 50/12 High-Voltage Amplifier is first of its class to deliver 100kV peak-to-peak.
9 November 2011 (Medina, NY) - Trek’s Model 50/12 high-voltage bipolar amplifier reaches voltage levels previously considered impossible. Recent developments in high-voltage technology and circuit design at Trek enabled the development of this groundbreaking amplifier which delivers ±50kV (100kV peak-to-peak) for dielectric evaluations, electrostatic deflection, HV testing and plasma studies.
New High Voltage Amplifier Delivers Wide Bandwidth
Model PZD700A Addresses Need for High Speed and Precise Control for Piezoelectric, Electro-optic, MEMS & Semiconductor Applications
15 June 2011 (Medina, NY) – Trek Model PZD700A provides a large signal bandwidth greater than 125 kHz (-3dB) and a small signal bandwidth greater than 200 kHz (-3dB). This bandwidth capability is especially important in new piezo and piezo-stack applications, which require the high current levels as provided by this new amplifier from Trek.
Trek also offers a PZD700A M/S design which delivers twice the current capability (double the power) of the standard PZD700A models.
Trek Introduces New High-Speed High-Voltage Power Amplifier
Model 10/10B-HS featured at SPIE Smart Structures Conference for use in Electrostatic Deflection, Material Characterization and Plasma Applications
15 April 2011 (Medina, NY) - This new ±10 kV four-quadrant DC-stable amplifier provides high speed of response with slew rate greater than 700 V/µs, high output current to 40 mA peak AC, and large signal bandwidth of DC to greater than 19.5 kHz (-3dB).
news release | product page | data sheet PDF
Trek Introduces New High-Frequency Amplifier
Model 2100HF Delivers High-Frequency, High-Speed, Wide-Bandwidth Performance for Applications in MEMS and Electro-Optics, Materials Research & Piezoelectrics
7 March 2011 (Medina, NY) - Trek Model 2100HF delivers high-frequency, high-speed, wide-bandwidth performance for use in MEMS, electro-optic, materials research, piezoelectric and ultrasonic applications. This product will be featured at Trek’s Booth #434 at the
American Physical Society (APS Physics) March Meeting
in Dallas, Texas, March 21-23, 2011.
Trek Introduces 2200 Series of High-Voltage 40 Watt Amplifiers
New Series Addresses Market Need for Cost-Effective High Performance in Electro-optic, MEMS, Piezoelectric and Other Applications
14 July 2010 (Medina, NY) – TREK, INC., a designer and manufacturer of high-voltage power amplifiers and high-performance electrostatic instrumentation, introduced its 2200 Series of 40 Watt High Voltage Amplifiers. Trek’s 2200 Series offers a desirable combination of high performance and attractive pricing. The three initial models of the 2200 Series – Model 2205, 2210 and 2220 – provide output voltage ranges of ±500 V, ±1 kV, ±2 kV (respectively). The 40 Watt reference equates to 40 watts peak, 20 watts RMS.
news release | product page | data sheet PDF
Trek’s New High Voltage Amplifier Offers Unique Combination of Capabilities
Model PZD350A Offers Wide Bandwidth and Addresses Need for High Speed and Precise Control of Output Voltages; Important in Piezoelectrics, Electro-optics, MEMS
20 May 2009 (Medina, NY) – TREK, INC., a designer and manufacturer of high-voltage power amplifiers and high-performance electrostatic instrumentation, has introduced a new High Voltage Power Amplifier - Trek Model PZD350A - which offers wide bandwidth and additional features important in piezoelectrics, electro-optics, MEMS and other applications.
The wide bandwidth of Model PZD350A, for both large signal and small signal levels, in combination with Trek’s industry-leading technology for precise control of output voltages, enable the PZD350A HV amplifier to address the specific need for high speed and fast settling when driving capacitive loads in piezoelectric driving/control, electro-optics, MEMS and other demanding applications such as laser modulation and ion beam control.
The Model PZD350A M/S has twice the current capability of the PZD350A with fast slew rates and wide bandwidths.( To Model PZD350A M/S page.... )
news release | product page | data sheet PDF
TREK Introduces Electrostatic Voltage Sensor
Model 875 Designed for In-line Monitoring of Electrostatic Charge Build-up; Helps Manufacturers Improve Production Yields & Product Integrity.
Applications for TREK’s new electrostatic voltage sensor include use in semiconductor manufacturing environments as well as other charge-sensitive processes, such as those found in the manufacture of electronics and other devices, including sensitive medical electronics, microelectronics, liquid crystal displays (LCDs), hard disk drives, microelectronic mechanical systems (MEMS),and in various sectors of the electronic manufacturing services (EMS) industry.
news release | product page | data sheet PDF
TREK Introduces 80 Kilovolt High Voltage Power Amplifier
New Model 40/15 Takes ‘High Voltage’ to New Levels
8 May 2008 (Medina, NY) – TREK, INC., a designer and manufacturer of high-voltage power amplifiers and high-performance electrostatic instrumentation, recently introduced a High Voltage Power Amplifier (Trek Model 40/15) which, by providing up to 80 kV peak-to-peak (±40 kV), delivers the highest level of output voltages for any amplifier in its class, taking the term ‘high voltage’ to new heights – to voltage levels not previously feasible or available from high voltage linear amplifiers.
news release | product page | data sheet PDF
Model 900A ESD Detector
TREK, INC. recently introduced the TREK Model 900A ESD Event Detector. This detector is a diagnostic tool for manufacturing environments that are sensitive to electrostatic discharge (ESD), including electronic, semiconductor & medical device manufacturing and assembly.
news release | product page | data sheet PDF
TREK Introduces Electrostatic Voltmeter
with Millivolt Resolution:
Model 325 is ideal for applications in
high-tech & semiconductor manufacturing, materials processing, materials science and R&D sectors.
news release | product page | data sheet PDF
Model 800 Infinitron®
TREK Introduces Ultra-High Impedance Voltmeter Model 800 Infinitron® allows contacting voltage measurements with virtually no charge transfer. Product Meets Market Need to Accurately Measure Site-Specific Voltage on ESD-Sensitive Devices During Handling and Processing in Semiconductor, Electronic Assembly, Hard Disk Drive and other Electrostatic-Sensitive Environments and Applications.
news release | product page | data sheet PDF
Model 157 Charged-Plate Monitor
with Enhanced Features
TREK introduces Model 157 Charged Plate Monitor
with Software Enhancements to provide additional Data Storage, Retrieval and Acquisition Options.
news release | product page | data sheet PDF
Model 158 Charged-Plate Monitor
Trek's Model 158 Charged-Plate Monitor Offers Unparalleled Convenience, Simplicity & Accuracy in One Lightweight Package.
more information
Model 542 Electrostatic Voltmeter
Trek Announces its New Model 542 Electrostatic Voltmeter for Drift Free, Accurate, Electrostatic Measurement for ESD Sensitive Processes.
news release | product page | data sheet PDF
High-Sensitivity, DC Stable Model 323 ESVM
Trek Features its High-Sensitivity, DC-stable Model 323 Electrostatic Voltmeter.
news release | product page | data sheet PDF
Business News
Trek Investment Supports Future Growth
(Medina, NY) - Trek has established a new Trek Technology Center in nearby Lockport, NY. Trek’s R&D and Engineering groups now occupy two floors of the recently renovated Canal Street Building in downtown Lockport. This move enables the two groups to work closely together on projects designed to expand the company’s future product offerings. The move also allows Trek to increase production floor space and capacity at its Medina, NY location in response to increased demand for the company’s current products.
“This investment demonstrates Trek’s commitment to technology, innovation and new products which address the evolving needs of our global marketplace. We are well-respected in the markets we serve and look forward to expanding our presence in other markets in the future,” said Michael Dehn, President of TREK, INC.
Local coverage:
- Buffalo Business First Online
- Lockport Union-Sun & Journal Online
Trek Board Elects Officers
The TREK, INC. Board of Directors elected the following officers for the year beginning January 1, 2009:
Michael Dehn, Manufacturing & Operations Manager, has been elected President. Mr. Dehn, with his significant manufacturing and operational experience, will focus on attaining revenue growth and improving operational efficiencies for the company through the effective production of existing and new products which address the needs of current and future markets.
Louise Cadwalader has been named Vice President of Finance and will serve as the corporate Vice President and Treasurer. Ms. Cadwalader, with her extensive expertise in finance, will focus on financial planning, operational analysis and financial reporting for the company.
John Carney of Carney & Giallanza was reelected as Secretary. Mr. Carney also serves as corporate counsel for TREK, INC.
Trek Sales Engineers Recently Certified by Electrostatic Discharge Association
TREK was recently notified that John Clack, Chris Lemke, and Elwin Rego (all Sales Engineers at Trek) achieved the status of "ESD Certified Professional - Program Manager" per the Electrostatic Discharge Association (ESDA). This TREK group achieved certification by passing the recent ESDA annually-offered certification exam. In connection with these certifications, Trek will offer ESD Seminars in the near future. more information
Trek Receives EuroAsia IC Industry Award
Trek's Model 800 Infinitron® was nominated for and won a 2007 EuroAsia IC Industry Award. It was one of four products to be 'short listed' for the Yield Management - Best Process Award. Award winners
more information
Trek Charged Plate Monitor Article Published in Conformity Magazine
Two of Trek's engineers, Christopher J. Lemke and Maciej A. Noras, authored an informative article on Charged Plate Monitors entitled, "Using a Charged Plate Monitor to Test Static-Dissipative Materials and Hand Tools " as published in the December 2006 issue of Conformity magazine, p.40 to p.46.
more information
The Trek Holding Company Ltd
The Trek Holding Company Ltd., located in Tokyo, Japan is pleased to announce the acquisition of U.S. based TREK, INC. and Trek Japan KK, effective February 8, 2006. This acquisition is part of the overall Succession Plan of the Trek Group and allows for both TREK, INC. and Trek Japan KK to maintain its current operations and management structures. more information
Additional news about Trek and its business and technical developments will be posted here as it becomes available.
